E-Tech VPPH01 Manual
14
upgrade addr:
Enter IP address or domain name obtained by ISP of FTP server supplying updated program here.
nts ip:
Fill IP address of time server here.
use daylight:
Enable/disable daylight by checking/unchecking this box.
timezone:
Select correct time zone in dropdown list. When debug set as 0[disable], if input ordinary password (default
one is 1234), then following page will pop up after clicking login. And only those parameters can be modified.
Update:
Click this button to save the configuration and restart the phone. Once the phone
restarts successfully, the new configuration is effective.
Note
After entering set page, if Update button is not clicked within 5 seconds, then when you click it again, the index
page asking for pin will pop up again. Then please input the password again to enter the set page and then click
Update
button to confirm the modification.
Phone Book:
Click this button to open the speed dial settings page. In this page, you can set and save the speed dial
number by typing the name into the Name field and then entering the corresponding number following the name. For
example, input Jack in Name field following 001, and then input 5989426454 into Phone number field. Then Jack’s
number 5989426454 is saved in phone book. Then please click Save/Back button. In normal state, you can
use speed dial to call numbers saved in phone book.
Note
With H323 protocol used, if the phone dose not login Gatekeeper or Gateway; or with SIP protocol used, the
phone dose not login Server Proxy, you can save IP address of other phone into phone number field. Please use
“*”instead of “.”. For example, save IP address 192.168.1.221, please input 192*168*1*221.
