35
34
❙
STEP 7
• Snap the mobile part back in by pressing gently as
shown opposite.
❙
STEP 8
ACTIVATION CODES
• Plug the in.
• Switch it on by pressing the on-off icon bottom left.
- After validating the
Optic
cartridge replacement
request a message is displayed asking for the first
activation code of the cartridge inserted to be
entered.
You will receive the activation codes after your order is
sent on the Client Corner and by following the instruc-
tions after having clicked on “K7 optic activation
codes”. They are then available in the section “My
messages” and sent to your email address. These acti-
vation codes are unique and take into consideration
the serial number of your machine and will not work
on any other E>One machine.
38
36
37
- Using the browser icon
16
(see page 15), enter
the first code provided (5 digits).
Icon
16
enables you to change the digit in each
box and move from one box to another. Once the
full code has been entered, confirm by pressing
icon
19
. You will then need to enter the second
activation code and confirm it by pressing icon
19
.
If you have entered the wrong code an error message is
displayed. You must then enter the two activation codes
again one after the other.
If the activation codes entered are correct, the message
“codes accepted” will appear on the screen. You should
then switch off your
and switch it back on again,
in order for the activation codes to be taken into account.
You may then use your E>One normally; the counter dis-
plays the number of shots available.
39
40
__
CHANGING THE OPTIC CARTRIDGE
Summary of Contents for E-one
