E-Swin E-one, User Manual

Page: 12 / 25

23 22
-
SETTING THE DESIRED INTENSITY
:
Once the skin colour is selected the intensity
gauge appears. Icon
11
(see page 15) is used to
increase or decrease the shot intensitys
- Icon
12
is used to confirm the intensity level
(see page 15)
• Unlocking the safety system
- Once the previous settings are confirmed by
icon
12 , icons 2 , 3 , 4 , 5 and 6 as shown on page
14 begin to blink
This procedure recalls the basic safety guidelines:
- Water must not be projected on the
- The must not be used if taking
photosensitizing medicine and the skin must be
healthy
- The
Mask
must be worn throughout the session
N.B.: the will not emit a shot until all safety
elements have been unlocked (by pressing on each
flashing icon)..
The intensity is set to low by default. This value produces good results for the majority of
users in optimum conditions of safety in 100% of cases. Increasing the intensity will result
in the following:
- Enhanced results
- Reduction in the number of sessions required to obtain a lasting result
- Increased skin sensation upon application
- Increased risk of redness or even burns on highly pigmented skin (dark skin) after one session
Important: the darker the skin treated (whether this is natural or through tanning), the more it is
recommended to set the to a low intensity.
Always start with a test patch at the lowest setting (default setting
proposed by the ) then increase the intensity level gradually by 1
point each time. Apply a shot then wait for 5 minutes to evaluate the skin's reaction. If no reaction occurs
you may then treat the entire area or increase the intensity by 1 point and re-evaluate the reaction (and
so forth).
NOTE
IN PRACTICE
9
10
HAIR REMOVAL WITH THE ______