E-Swin E-one, User Manual

Page: 13 / 25

25 24
"I am a man with fair skin and I want to epilate my
armpits."
The following selections apply:
. Male
. Fair skin (1st colour)
. Thickest hair (4th thickness)
. Intensity level gauge (1st level)
When the beard is flashed, it could be painful so we recom-
mend that before flashing, the gel should be stored in the
fridge for 3 hours.
"I am a woman with dark skin and I want to epilate my
arms."
The following selections apply:
. Female
. Darkest skin (5th colour)
. Hair (2nd thickness)
. Intensity level gauge (1st level)
❙
EXAMPLES
❙
STEP 4
APPLICATION
• Circle the area to be treated using the
pen
.
• Cover the small areas to be protected (moles etc.) with
the
patches .
• Apply the
gel
in a thin layer to the area to be treated.
Observation: if you wish to treat a large area, do not
spread the gel on the whole area straight away as it will
dry and become ineffective in terms of optical transmis-
sion. Spread the gel on the area in question gradually as
you go. Once the gel has been applied to the skin and
treated it must not be reused on another area. Once the
gel has been subjected to a shot, changes are likely to
occur in its optical characteristics.
• Put the mask mask on. Any other persons in the vici-
nity during use must also wear a
mask
. Important: do
not apply shots to the periocular area (under the Mask
protecting your eyes, eyebrows, eyelashes etc.).
Reminder: the
Pen
,
Gel
,
Patches
,
Stop
marking
plate and Mask should be provided with your
. The use of any other products may lead to
skin burns and are not covered by the guarantee
11
12
• If necessary, use the
stop
to hide any large areas not
to be treated (tattoo etc.)
HAIR REMOVAL WITH THE ______
TIPS !
To remove easily the applicator from its base, you should hold its
big white cable and lift up. The applicator can be then taken
down easily.