19
REMOVING HAIR WITH
y
REMOVING THE MOBILE HEAD
TO CLEAN THE INTERNAL AND EXTERNAL OPTICAL COMPONENTS
•
Hold the applicator so that the air vents are facing you.
Insert the
extractor
between the mobile and the
fixed lateral casing of the applicator (image
C
).
•
Push the
extractor
all the way into the mobile head
(image
C
).
•
Press simultaneously on the 2 locking tabs that hold the
mobile head, and remove the mobile head (image
E
).
•
Remove the
extractor
and delicately place the
applicator on a flat surface (image
F
).
•
Grab the mobile head; the filter is now in front of you
(image
G
). Spray
clean
on a lint-free cloth beforehand
(image
H
) and clean the
filter
with the cloth (image
I
).
•
Grab the mobile head, slowly part the partitions outward
(image
J
), delicately remove the
filter
(image
K
) and
place it on a flat surface (image
L
).
•
Repeat the same cleaning operation on the internal
optical glass.
The
filter
(the flat red piece made of glass) must be
intact, not cracked and the surface must be flat and regular.
It must be clean and dust-free. For better efficiency of
, it is recommended to clean the
filter
before
every use with the spray
clean
that is provided when
you purchase
. Any damaged
filter
following
inadequate maintenance will not be covered by the
warranty (see the terms of use of the spray above).
y
BEFORE EACH USE
•
Check the power cord (must not be pinched or crushed, wire must not be bare).
•
Check the cable connecting the base to the applicator (no visible impairment).
•
Check the external (image
A
) and internal ( image
B
) optical parts of
.
CHECK THE EXTERNAL OPTICAL PARTS
Make sure that the glass tip of the applicator (optical guide), does not have any surface
defect, and if it does, it is essential to change the mobile head. You can order this part at
prostore.esw-beauty.com
.
CHECK THE INTERNAL OPTICAL PARTS
Before each use and before plugging in your
, you must check the integrity of
the internal optical parts: tube,
filter
(image
B
) (flat red piece made of glass), optical
guide.
WARNING:
You must not use your
if the external and/or internal optical part have been damaged.
WARNING:
is restricted to professional use only.
18
A
B
C
E
F
I
K
D
F
H
J
L
