IMPORTANT:
Do not damage, bend, or cut the activation card of
the
optic
cartridge. Damaged cards are not covered the E-SWIN
warranty. Therefore it will not be replaced and its
optic
cartridge
will be unusable. You will need to buy a new
optic
cartridge and
its activation card. Do not keep the activation card near a heat or
electromagnetic source.
21
y
USE OF THE ACTIVATION CARD FOR
• Take the activation card of your optic cartridge.
• Insert the card into the slot provided for this purpose, located on the
side of
, in the base. The location of this slot is easily identifiable
thanks to the sticker, which delineates it.
• Leave the card like that throughout the entire session.
• At the end of the session, remove the activation card while making sure
not to damage it and store it in its case.
•
Follow the procedure for turning off the device.
RFID V1.00
E-O75c V1.00
M1
y
STARTING
FOR THE FIRST TIME
There are both “activation codes” and “cartridge codes”.
1) ACTIVATION CODES
You own a
or a
:
Activation codes (5 characters, followed by another set of 5 characters) must be
entered when you start the device for the first time. Once entered, these codes
will no longer be requested.
2) CARTRIDGE CODES
You own a
:
Cartridge codes (5 characters, followed by another set of 5 characters) must
be entered each time you renew the optic cartridge. These codes are available
on your personal customer client space and enable you to activate the new
cartridge.
You own a
:
There are no cartridge codes to enter when you renew the optic cartridge.
3) CONNECT
TO ITS POWER CORD:
The procedure for internal testing of
is triggered and lasts a few seconds.
At the end of it, the following screen automatically appears (screen
M1
/
M2
)
.
20
IMPORTANT:
*
: Works with activation codes for the optic cartridge. This
means that each time you change the optic cartridge, you must
enter specific codes for the new optic cartridge.
*
: Works with activation card. This means that each time
the optic cartridge (and its activation card) is changed, there are
no codes to enter. Once the new optic cartridge is in place, simply
insert the new activation card in the base of the device.
E-O75
V1.00
M2
REMOVING HAIR WITH
screen
At the bottom left of the screen, you will see the
module version of the software of the device and
underneath, you will see the name of the device as
well as the software version number.
screen
At the bottom left of the screen, you will see the
name of the device as well as its software version
number.
