e-survey E3L, User Manual

Page: 71 / 116

SHANGHAI ESURVEY GNSS CO., LTD.
61
5.2.10 Lead Measure
This program is used for survey of hierarchical control traversing and mapping traversing
etc. and adjustment and computation of closure.
To set the lead measurement, do the following:
1. To enter Program menu page, press MENU and F1 or 1 .
2. Press PAGE to go to the third page, and press F2 or 01 :
o
: it indicates that settings are done.
o
: it indicates that settings are not done.
3. Do the following:
a. Set a Job
If you have done it before, you can skip it.
b. Start Lead Measurement
5.2.10.1 Set a Job
See 5.2.1.1 Set a Job for details.
5.2.10.2 Start Lead Measurement
To start lead measurement, do the following:
1. In REFERENCE LINE/ARC display, press F4 / 4 . The following display shows:
2. Set the Lead
3. Set the Station
4. Measure the Point
5. Calculate the Lead
6. View Data
7. Transfer Data