e-survey E3L, User Manual

Page: 85 / 116

SHANGHAI ESURVEY GNSS CO., LTD.
75

Trigger key
It is used to define the side red key as a fixed function:
o
ALL : to start distance and angle measurements and save measured values.
o
DIST : to start distance and angle measurements without saving measured
values.
o
Off : to disable trigger key.

USER Key
Each function achieved by function key can be set as USER key, which makes
USER key on the operating panel act as a shortcut key.

V-setting
The 0 - orientation of the vertical circle can be either selected for the following:
o
Zenith : Zenith = 0°, Horizontal = 90°
o
Horizon : Zenith = 90°, Horizontal = 0°
o
V-(%) : 45°=100%, Horizontal=0°

Tilt Correction
o
Off : to disable the compensator.
o
2-axis : to make compensation for two axes.
o
1-axis : to make compensation for a single axis.
You can also set it by Star key.

Horizontal Collimation
o
On : to enable the horizontal collimation.
With it enabled, each measured Hz-angle is corrected (depending on V-
angle). Thus, please enable it in general.
o
Off : to disable the horizontal collimation.

Sector Beep
o
On : to enable the sector beep.
With it enabled, the sector beep sounds at right angles 0°, 90°, 180°, 270° or
0 gon, 100 gon, 200 gon, 300 gon.
o
Off : to disable the sector beep.
Example
From 95.0 gon to 99.5 gon (or from 105.0 gon to 100.5 gon), a Fast beep sounds
while from 99.5 gon to 99.995 gon (or from 100.5 gon to 100.005 gon) a
Permanent beep sounds: