12
NOTES for the Custom Timer:
1.
When programming, if you have selected all the alerts you need, you can press Mode
at any time to save your programming. To start the timer, press
Enter
once, then
Mode
once.
2.
Once the custom timer is programmed, it will remain programmed until all program-
ming is erased.
3.
To restart timer after countdown completes for one-time countdown or for count-up,
press
M
to restart (at any time during count-up).
4.
Set any alert to 1 second to have a signal at end of countdown.
5
. From "CUSTOM TIMER" you can press
Enter
and wait until ready to start count-
down by pressing
Mode
.
Checking Custom Timer programming
6. Meeting Timer
Set for any time between 10 minutes and 120 minutes. Signals at 1/2 way through,
5 minutes before the end, and at the end of meeting time. Each signal is unique. Repeats
on the 1/2 hour, 1 hour, or every 2 hours.
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
9
NOTE:
The Timer saves the last programmed time. When countdown is complete, this saved
time is displayed. To use this time again, press
Mode
to start the timer with this time. If you wish
to use this time again but have gone to another mode, go to TIMER SET via the
Mode
button,
press
Enter
once and press
Mode
to start this countdown time (you can wait as long as you wish
to press
Mode
to start the countdown).
5. Custom Timer
You can program up to 6 unique alerts to signal anywhere within the countdown
time. Set a countdown time of from 2 seconds to 60 minutes. Then within this time,
program up to 6 unique alerts to signal at any time within the countdown time pe-
riod. The countdown time period can be set to countdown once, or set to repeat
over and over, or set for a count-up after countdown is finished (so you can see how
much time has elapsed since countdown completed).
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
