14
MEETING TIMER NOTES:
1. Once a meeting time is started, it will repeat every 1/2 hour for durations of 10-30 minutes,
and repeat every hour for durations of 31-60 minutes, and repeat every other hour for durations of
61-120 minutes. For example, program a meeting time of 50 minutes and start it on the hour, it
will go for 50 minutes, wait 10 minutes and then begin again on the next hour. If you start this
50 minute meeting time at 10 minutes after the hour, it will go for 50 minutes, wait 10 minutes
and begin again at 10 minutes after the next hour.
2. Meeting times of 30, 60, 120 minutes will repeat back to back automatically. For all other
meeting times, there will be a space before the meeting timer repeats. For example, for a meeting
time of 25 minutes, it will go for 25 minutes, wait 5 minutes and begin again. For a meeting time
of 40 minutes it will go for 40 minutes, wait 20 minutes and begin again. If you want a meeting
time to repeat back to back and it is not 30, 60 or 120 minutes, you will need to restart the meet-
ing timer manually at the end of each meeting time by pressing the two middle buttons simulta-
neously, and then pressing the
Enter
button to re-start the meeting timer at that time.
3. When the meeting timer is in operation, it does not show countdown. It only shows "ON" and
the total meeting duration.
7. Stopwatch
(TIP: You can start the Stopwatch and then leave this mode and it will continue to count. If you
do not need the stopwatch to run while using other functions, stop it before leaving this mode.
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
7
3. Alarm Settings
Up to 12 Daily Alarms may be set.
NOTE
: The
Alarm auto-protect feature
requires
that you hold the
Enter
button down for 3 seconds to enter the Alarms mode.
TIP 1
:
To set multiple alarms or to check your alarms,
use the
Enter
button to scroll through the alarms. To set
additional alarms go to a blank setting, then continue as
described above.
TIP 2
: Vibration alert = 20 seconds. Press any button
to stop alert. If you press the
Lite
button, it stops the
alert and engages the snooze feature - see
Note 3
below
about the snooze button.
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
