NOTES:
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
16
Operating Modes
Your Vibrating Pager Reminder has seven operating modes (accessed by the Mode
button
)
as described on the following pages.
1.
Time and date adjustment
(TIME & DATE): Use to set time and date.
2.
Vibration and Beep adjustment
(VIB & BEEP): Use to adjust Vibration Speed
(1 = low, 2 = medium, 3 = high), Beep Volume (1-3), Number of beeps (1-6).
3.
12 Alarms
(ALARMS SET): Use to set up to 12 alarms in a 24-hour period.
Alarms programmed in this mode will signal no matter what other mode the unit
is in.
4.
Timer
(TIMER SET): Use for simple timing or to repeat a time over and over.
5.
Custom Timer
(CUSTOM TMR): Use to set any countdown time of up to 60
minutes, and program with up to six custom alerts to go off at any time in this
period. Can also set it to repeat, or count-up after countdown is complete.
6.
Meeting Timer
(MEET-TIMER): Use for meetings, presentations or to track
time during any interval. The Meeting Timer vibrates at ½ way, at 5 minutes be-
fore time’s up, and at time’s up, for any time interval set between 10 –120 min.
7.
Stopwatch
(STOP-WATCH): use to count time for any event.
Setting Protection: (
Setting protection engage automatically)
To protect the Timer, Meeting Timer and Custom Timer settings from erasure by
accidental button presses, the Vibrating Pager Reminder has a “
button auto-lock
”
feature (which engages automatically). To
exit from the Timer or Meeting
Timer you have to
press the two middle buttons simultaneously
, and then press
the Mode button to exit. To
exit from the Custom Timer you only have to press
and hold the two middle buttons simultaneously
for 2 seconds.
5
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
