Fixed Daily Schedule (ALM 1 - 12)
Your e-pill MeDose PARKINSON has up to twelve (12) Individual Alarms (“multiple alarm
clocks”). No alarm reset is required by the patient once the alarm(s) have been set. Alarms
reset automatically each day at midnight.
This setting works best for Parkinson’s patients that
start their day at the same time
every
day. The maximum number of daily alarms is twelve (12). Alarm duration is 20 Seconds.
Tap button C until mode “ALM” is shown with a number N (N=1 thru 12) on the
display.
Tap button B to go to the alarm you want to
be set. AL1 (first alarm), AL2 (second alarm)
…..to AL12 (last alarm).
Alarms should be set in consecutive order
starting with the earliest alarm. For each
DAILY alarm (1 ALM – 12 ALM) that you
need to set, do the following:
Press and hold button D for 5 seconds to enter the setting (programming) mode.
The HOURS will start flashing and “ON” will appear next to the minutes (lower right hand
corner, see picture).
Tap A (increase) or B (decrease) until the correct HOUR is reached. Please note the PM
indicator or AM indicator (lower left side of display). The AM / PM may be hard to read (a
magnifier may help) if your watch is set for AM/PM time.
Tap C
Tap A (increase) or B (decrease) until the correct MINUTE is reached.
Tap D to leave setting mode and store the alarm setting.
Proceed to your next alarm by tapping button B. You may set up to 12 auto repeating daily
alarms. Please make sure ON is displayed next to the minutes in the lower right hand corner.
If “OF” (alarm OFF) is showing you can toggle to “ON” (alarm ON) by tapping D.
The Alarm can be set to Vibrating Alarm, Sound Alarm or Both (Vibration AND Sound).
Note: To turn OFF an alarm already set, tap the D button when the alarm is shown on the display.
