Varying Daily Schedule (CDT up to 99 hours)
The e-pill MeDose PARKINSON has a Count
Down Timer (CDT / Interval Timer). The
Count-Down Interval Timer can be put in
Auto-Reset mode. The alarm duration is 20
Seconds. No alarm reset is required by the
patient once the interval has been set and the
count-down has started in auto-reset mode.
When in this mode, the e-pill alarm watch is
in an “end-less” loop“;
count-down
alarm
re-set
Example: your Doctor wants you to take your Parkinson’s medications every 4 ½ hours.
The picture shows the Auto Re-Set Count-Down Interval Timer turned On (CDT is shown with the upper and
lower line in front of it). The interval in the picture is set to 4 Hours and 30 Minutes and it will auto-repeat.
The CSDT setting works best for Parkinson’s patients that start their day at a
different time
each day
, yet need to take medication(s) on a FIXED INTERVAL (Hours and Minutes).
The Alarm can be set to Vibrating Alarm, Sound Alarm or Both (Vibration and Sound).
This setting CDT works best for Parkinson’s patients that do NOT start their day at the same time
every day AND
are taking medications on a fixed interval basis.
Tap button C until mode “CDT” is shown on the display.
You can set the Count-Down Interval Timer for “ONE count-down” or for “REPEAT” count-
down (“endless loop”). When in “endless loop” two line are shown on the display in front of the
word CDT / REP. To set or change the CDT timer settings:
Press and Hold button D for 5 seconds and the Interval HOUR will begin to flash.
Tap A (increase) or B (decrease) until the correct HOUR is reached to set Interval
duration in Hour(s) (up to 99 Hours).
Tap C to go to MINUTES. The Interval MINUTES will begin to flash.
Tap A (increase) or B (decrease) until the correct MINUTES are reached to set the
Interval duration in Minute(s).
Tap C to go to REP (Repeat Interval). REP will begin to flash.
Tap A to Turn ON Repeat (two lines are shown before REP) or Turn OFF Repeat
(NO lines are shown before REP)
Tap D to confirm and store your interval alarm time settings.
Tap A to start the countdown timer. If the Two Lines are shown before the word CDT
the Auto-Repeat function is turned on.
Tap C to go back to real time.
Tap button A to Stop. When timer is stopped, press button B and the preset interval will be
reloaded (Repeat Timer). Press button A to start / re-start the count-down interval timer.
