6
E-MU Systems
XL-7 / MP-7 Operation Manual Addendum
Extend Sequence
Data To
This feature lets you change the length of any selected tracks after
recording a pattern. If you are lengthening a pattern, the pattern is looped
to fill in the empty space. If you set the length shorter than the existing
pattern, the pattern will be truncated.
You can set the pattern length before you extend so that only those
bars will be copied. The copied data will be merged with the data in the
subsequent bars of the pattern.
To Extend the Length of Selected Tracks:
1.
Select the pattern
you wish to extend.
2.
Press the
Pattern Edit
button from pattern mode.
3.
Scroll to the
Pattern Length
screen and set the length to the measures
you wish to extend. For example, if you want to copy the first measure,
set the length to 1.
4.
Scroll to
Extend Sequence Data
using the Data Entry Control.
5.
Move the cursor to the lower line of the display and select the new
pattern length.
6.
Select the Track(s)
that you want to extend using the Track Enable/
Mute buttons.
7.
Press
Enter
. The following screen appears.
8.
Press
Enter
again to extend the pattern or any other key to cancel the
operation.
Bar 1
Bar 2
Bar 3
Bar 4
Bar 1
Bar 2
Bar 3
Bar 4
To Extend the 1st Bar over 4 Bars
1. Set Pattern
Length to 1-bar
2. Extend Sequence
Data to 4-bars
EXTEND SEQUENCE DATA TO
bar: 8
--- PERFORM OPERATION? ---
Enter = Yes Other = Cancel
