AQ EXPERT Instruction & Operations Manual
Version 1.13
Page 52 of 63
This standard probe (Part # AACSF22) is suitable for temperatures up to 800ºC/1470ºF.
The end of the probe’s sampling line connects to the SAMPLE IN quick disconnect
connector of the AQ Expert and the thermocouple connector connects to either of the
yellow TEMPERATURE 1 or 2 inputs on the AQ Expert.
3. OPTIONAL VINYL CARRYING CASE (part #: E858140)
4. OPTIONAL PITOT TUBES
Pitot tube
–
This optional L-shaped pitot tube consists of stainless steel tubing with the
tips open and bent at a certain angle to properly measure air and/or gas velocities. The
Pitot tube must always be oriented with the open tips parallel to the direction of the air
flow. The end of the Pitot tube assembly is connected by means of two flexible hoses to
a very accurate pressure transducer located inside the monitor.
5. OPTIONAL DIFFERENTRIAL PRESSURE HOSES
(Part #: AACKP01)
This optional PRESSURE HOSES consist of
two (2) clear hoses for either (1) single positive
pressure connection, one (1) single negative
pressure connection, or (2) hoses for differential
pressure using both connections
simultaneously. The hoses connect to the (-)
and/or (+) PRESSURE connections on the Front
face of the AQ Expert.
