AQ EXPERT Instruction & Operations Manual
Version 1.13
Page 27 of 63
CHAPTER 8
WIRELESS REMOTE PRINTER
The AQ Expert uses a wireless Bluetooth remote printer. The printer is
powered by a rechargeable battery. An AC charger is supplied with the
printer. The printer is optional with the
AQ Expert.
First you must turn the printer on. Then press
to scan and
connect with your wireless printer to establish communications between
the monitor and the printer.
When you have connected successfully the printer’s green status light will turn on.
Pressing the
key will now display the PRINT MENU.
The PRINT MENU allows the user to print test records.
PRINT TEST RECORD: This option will print a test record of
the current air quality parameters.
PRINT TEST LOG: This option begins a log of the following air
quality parameters: CO2, Temperature, %RH, Wet Bulb, Dew
Point, Barometric Pressure, Oxygen, Carbon Monoxide, VOCs,
etc.
Print Test Record
Start Test Log
Log Interval: 60s
Print Buffer
Configure Record
Edit Customer Name
Calibration Record
Paper Feed On/Off
Mobile Printer...
Serial #: 000000
Company Name
TEST RECORD
AUG 1 ‘14 12:45:00
CO2: XX.X %
CO: XXXX PPM
T ambient: XXX
º
F
RH: XX.X %
DPt: XXX
º
F
WBT: XXXX
º
F
BP: XXXX psi
Oxygen: XX.X %
NO: XXXX PPM
NO2: XXXX PPM
NOx: XXXX PPM
SO2: XXXX PPM
H2S: XXXX PPM
O3: XXX PPM
VOC: XXX PPM
* WIRELESS PRINTERS *
Scan for printers
Press OK to search
* WIRELESS PRINTERS *
Device Found
Press OK to Connect
Device 1:001122334455
* WIRELESS PRINTERS *
Device Connected
Press OK to Continue
Device 1:001122334455