AQ EXPERT Instruction & Operations Manual
Version 1.13
Page 39 of 63
Cleaning the Lamp
Grab the lamp by the cylindrical glass body and clean the window by rubbing it against
the Polishing Pad. Use a circular motion and try to keep the window surface flat relative
to the pad. Five seconds of rubbing will be enough in most cases. Another indication of
cleaning completeness is that you have used about 1/6
th of the pad’s surface during the
procedure.
Reassembly
1.
Install the lamp into the sensor, making sure that the lamps metalized pads are
aligned with the corresponding excitation springs inside the lamp cavity.
