13
If
Other
is selected, you must enter a value. Click on
OK
or
to enter into sub function. With
and
, enter the first digit then move to the
next one with
. Confirm with
OK
.
•
Solenoid valve (available with the ± 500 Pa module)
Click on
OK
or
to enter into the sub function. Select respectively
ON
or
OFF
with
and
in order to enable or disable the solenoid
valve function. Confirm wih
OK
or
. When the solenoid valve is enabled, it runs every minute.
Click on
OK
or
to enter into sub function. Enter the day with
and
then move to the next digit with
. Repeat this operation for the
month, year, hour and minute. Confirm wih
OK
.
This sub-function allows to enable or disable the keypad beep. Click on
OK
or
to enter into the sub function. Select respectively
ON
or
OFF
with
and
in order to enable or disable the beep.
Confirm wih
OK
.
This sub-function allows to enable the automatic shut-off and to select the delay in minute. Click on
OK
or
to enter into the sub function.
Select, with
and
,
OFF
in order to disable the automatic shut-off or enter the delay (from 15 to 120 minutes).
Confirm wih
OK
.
•
Date / Time
•
Beep
•
Extinction
Click on
OK
or
to enter and a list of languages available appears.
Select language with arrow keys
and
and Confirm wih
OK
.
Parameters
•
RF Logging
This sub-function allows to enable or disable the
RF Recording
. Click on
OK
or
to enter into the sub function. Select respectively
ON
or
OFF
with
and
in order to enable or disable this function.
Confirm wih
OK
.
This sub-function allows to enable or disable the screen saving. Click on
OK
or
to enter and a list appears. Enter the delay before the
sreen saving activation
with
and
Confirm wih
OK
.
•
Screen Saving
IV – Menus
This sub-function allows to modify the backlit. Click on
OK
or
to enter. Select your backlit level (from 0 to 9 or
AUTO
) with
and
.
Confirm wih
OK
.
If you select AUTO, the AMI 300 adjuts automatically the backlit according to the room brightness.
•
Backlit
•
Language
•
Select units
Click on
OK
or
to enter into sub function : a list of units available appears. Select unit required with
and
. Confirm with
OK
.
Click on
Esc
to return to previous screen.
•
Select integration
The coefficient of integration allows to smooth the measure, to avoid variations. Click on
OK
or
to enter into sub function : a list of coefficient
(From 0 to 9) appears. Select coefficient required with
and
. Confirm with
OK
.
Coefficient 0: no integration, important fluctuation in the shown measure.
•
Select compensation
It is possible to modify the value of the compensation in temperature. Indeed, the velocity and the airflow with Pitot's tube and with Debimo blades
are calculated from a temperature of use in +20°C. It is thus necessary to enter the real temperature of use to obtain more precise results.
Click on
OK
or
to enter into the sub function. or – signs with
and
with
and
then pass on the first digit with
. enter the
first digit then move to the next one with
. Confirm with
OK
.
•
Select airflow system (only available for Air velocity and Airflow functions)
Click on
OK
or
to enter into sub function : a list of air flow
systems available appears (Pitot tube L, S, Debimo or Other).Select your system with
and
. Confirm with
OK
.
