E.H. Wachs 08-051-MAN User Manual Download Page 55

Page: 55 / 84

Chapter 5, Parts List and Ordering Information

E.H. Wachs

Part No. 08-051-MAN, Rev. 1-0709

Chapter 5

Parts List and

Ordering Information

RDERING

NFORMATION

To place an order, request service, or get more detailed
information on any E.H. Wachs products, call us at one of
the following numbers:

U.S.

800-323-8185

International: 847-537-8800

You can also visit our Web site at:

www.ehwachs.com

Ordering Replacement Parts

When ordering parts, refer to the parts lists in this chapter.
Please provide the part description and part number for all
parts you are ordering.

Repair Information

Please call us for an authorization number before returning
any equipment for repair or factory service. We will advise
you of shipping and handling. When you send the equip-
ment, please include the following information:
•

Your name/company name

•

Your address

•

Your phone number

In This Chapter

RDERING

NFORMATION

ARTS

ISTS

AND

AYOUT

RAWINGS

Summary of Contents for 08-051-MAN





















































































Search results

Summary of Contents for 08-051-MAN

Reviews:

Related manuals for 08-051-MAN

Brands by name

Popular brands

E.H. Wachs 08-051-MAN, User Manual

Search results

Summary of Contents for 08-051-MAN

Reviews:

Related manuals for 08-051-MAN

Brands by name

Popular brands