Required Equipment
Radio
You will need a minimum of a 4-channel radio for this model. A complete
radio system can be purchased or, if you have a suitable transmitter, just the
airborne components will be required.
Complete System
Spektrum DX6i 2.4GHz DSM2 radio system
SPM6600
(4) JR SPORT™ MN48 mini servos
JSP20040
(2) JR SPORT 6” servo extension leads
JSP98110
(2) JR SPORT 3” servo extension leads
JSP98100
-or (1) Y-harness (JSP98020) if not using the dual aileron function
Airborne Components
Spektrum AR6200 DSM2 2.4GHz receiver
SPMAR6200
(4) JR SPORT MN48 mini servos
JSP20040
(2) JR SPORT 6” servo extension leads
JSP98110
(2) JR SPORT 3” servo extension leads
JSP98100
-or (1) y-harness (JSP98020) if not using the dual aileron function
Motor
The Pulse XT 25e is designed to accept either the E-flite Power 25 or Power 32
Brushless Outrunner motors and comes complete with the hardware for either
installation.
Sport Motor Setup
E-flite Power 25 brushless outrunner motor
EFLM4025A
E-flite 40-Amp Pro Brushless ESC
EFLA1040
E-flite 3200mAh 3S LiPo battery pack
EFLB32003S
APC 12 x 8E propeller
APC12080E
High Power Motor Setup
E-flite Power 32 brushless outrunner motor
EFLM4032A
E-flite 60-Amp Pro Brushless ESC
EFLA1060
E-flite 3200mAh 4s LiPo battery pack
EFLB32004S
APC 13 x 6.5E propeller
APC13065E
Required Tools and Adhesives
E-flite parkflyer tool assortment
1/16 (1.5mm) in drill bit
E-flite 1/4" nut driver
5/64 in (2mm) drill bit
7/64” balldriver
Dremel rotary tool
12 minute epoxy
High speed cutoff wheel
Thin CA (cyanoacrylate)
High speed rotary cutter
Canopy glue
Low-tack tape
Pin drill
Clear tape
Tapered reamer
Felt-tip pen
3/32” ball driver
Tongue depressors
#0 Philips screwdriver
Mixing sticks
#1 Philips screwdriver
Dental floss
Threadlock
For Float installation
11/64 in (4.5mm) drill bit
Flat file
Drill
Ruler
1.5mm Allen wrench (included with EFLA500)
Optional Accessories
E-flite 25-size Float Set
EFLA500
E-flite 1 - 5 cell LiPo charger with balancer
EFLC505
Power Meter
EFLA110
LiPo Charge Safe Charging Bag
KSJ1821
JR MatchMaker™
JRPA915
36” flex cable (required for float installation)
SUL508
4
