E-flite Mini Pulse PNP Assembly Manual
Optional Accessories
EFLA110
Power Meter
Required Tools and Adhesives
Tools & Equipment
EFLA250
Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257
Screwdriver, #0 Phillips (or included
with EFLA250)
EFLA251
Hex Wrench: 3/32" (or included
with EFLA250)
EFLA263
Nut driver: 1/4"
Needle-nose pliers
Note Regarding Hinges
For your convenience and to speed the assembly process, the
hinges have already been installed and glued. We suggest that
you take a minute before beginning assembly of your model to
check them.
Grasp the wing and aileron at each hinge location, then gently
pull on the aileron to ensure the hinges are secure and cannot
easily be pulled away from either surface. Use caution when
gripping the wing and aileron to avoid crushing or damaging
the structure. Repeat this process for the elevator and rudder.
If, however, you find that the hinges pull away, simply
wick thin CA into the hinge slots and reinstall the
hinges/surfaces.
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly more
volatile than alkaline or Ni-Cd/Ni-MH batteries used
in RC applications. All manufacturer’s instructions
and warnings must be followed closely. Mishandling
of Li-Po batteries can result in fire. Always follow the
manufacturer’s instructions when disposing of Lithium
Polymer batteries.
Warning
An RC aircraft is not a toy! If misused, it can cause serious
bodily harm and damage to property. Fly only in open areas,
preferably at AMA (Academy of Model Aeronautics) approved
flying sites, following all instructions included with your radio.
Keep loose items that can get entangled in the propeller away
from the prop, including loose clothing, or other objects such as
pencils and screwdrivers. Especially keep your hands away from
the propeller.
Warranty Period
Horizon Hobby, Inc., (Horizon) warranties that the Products
purchased (the “Product”) will be free from defects in materials
and workmanship at the date of purchase by the Purchaser.