background image

E-flite Mini Pulse PNP Assembly Manual

Limited Warranty

(a) This warranty is limited to the original Purchaser 

("Purchaser") and is not transferable. REPAIR OR REPLACEMENT 

AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE 

REMEDY OF THE PURCHASER. This warranty covers only those 

Products purchased from an authorized Horizon dealer. Third 

party transactions are not covered by this warranty. Proof of 

purchase is required for warranty claims. Further, Horizon 

reserves the right to change or modify this warranty without 

notice and disclaims all other warranties, express or implied.
(b) Limitations- HORIZON MAKES NO WARRANTY OR 

REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-

INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE OF THE PRODUCT. THE PURCHASER 

ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED 

THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS 

OF THE PURCHASER’S INTENDED USE.
(c) Purchaser Remedy- Horizon's sole obligation hereunder shall 

be that Horizon will, at its option, (i) repair or (ii) replace, any 

Product determined by Horizon to be defective. In the event of 

a defect, these are the Purchaser's exclusive remedies. Horizon 

reserves the right to inspect any and all equipment involved in a 

warranty claim. Repair or replacement decisions are at the sole 

discretion of Horizon. This warranty does not cover cosmetic 

damage or damage due to acts of God, accident, misuse, 

abuse, negligence, commercial use, or modification of or to any 

part of the Product. This warranty does not cover damage due 

to improper installation, operation, maintenance, or attempted 

repair by anyone other than Horizon. Return of any goods 

by Purchaser must be approved in writing by Horizon before 

shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT 

OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR 

PRODUCTION OR COMMERCIAL LOSS IN ANY WAY 

CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS 

BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT 

LIABILITY. Further, in no event shall the liability of Horizon 

exceed the individual price of the Product on which liability 

is asserted. As Horizon has no control over use, setup, final 

assembly, modification or misuse, no liability shall be assumed 

nor accepted for any resulting damage or injury. By the act of 

use, setup or assembly, the user accepts all resulting liability.
If you as the Purchaser or user are not prepared to accept the 

liability associated with the use of this Product, you are advised 

to return this Product immediately in new and unused condition 

to the place of purchase.
Law: These Terms are governed by Illinois law (without regard to 

conflict of law principals).

Summary of Contents for Mini Pulse XT PNP





















Reviews: