EN
7
Switch on the transmitter, enable throttle cut and connect the battery.. Use the transmitter to operate the aileron, elevator
and rudder controls. View the aircraft from the rear when checking the control directions.
Control Direction Test
Transmitter
command
Control Surface Response
Elevators
1. Pull the elevator stick back.
The elevator should move up,
which will cause the aircraft to
pitch up.
2. Push the elevator stick forward.
The elevator should move down,
which will cause the aircraft to
pitch down.
Ailerons
1. Move the aileron stick to the
left. The left aileron should
move up and the right aileron
down, which will cause the
aircraft to bank left.
2. Move the aileron stick to the
right. The right aileron should
move up and the left aileron
down, which will cause the
aircraft to bank right.
Rudder
1. Move the rudder stick to the
left. The rudder should move to
the left, which will cause the
aircraft to yaw left.
2. Move the rudder stick to the
right. The rudder should move
to the right, which will cause
the aircraft to yaw right.
Elev
ator
Aileron
Rudder
