EN
Model Assembly
Continued
Wing Installation
Continued
5. In the fuselage, locate the 2 screw holes (
B
) at the bottom of the
fuselage. Use the 2 included screws (
C
) to secure the wings into place.
CAUTION:
DO NOT crush or otherwise damage the wiring when attach-
ing the wing to the fuselage.
6. Connect the right aileron servo wire into port 6 and the left aileron servo
wire into port 2 as shown.
7. Reinstall the canopy hatch.
When needed, disassemble in reverse order.
Top Wing Placement
1. Slide the long wing tube (
A
) into the hole of the center strut bracket
located on top of the fuselage.
2. Slide the left and right top wing over the wing tube until they slide firmly
into the recesses of center strut bracket.
B
Left side
ailerons
A
C
20mm (2)
Right side
ailerons
8