4
PRE-INSTALLATION
To avoid scratching the finish, assemble the product on a soft, non-abrasive surface, such as carpet
or cardboard. Assembly of this product may require more than one person.
INSTALLATION
Attach top electric fireplace trim piece with the screws provided. Please refer to the detailed
instructions that came with the manual that you purchased.
OPERATION
The electric fireplace “ON/OFF” switch must be switched to “ON” before any of the control functions
will operate. The main switch does not have to be turned off when the electric fireplace is not being
used for brief time periods. If, however, you are not planning to use the electric fireplace for
extended periods of time, we recommend the main power “ON/OFF” be switched off.
This electric fireplace insert features convenient separate controls for the flame effect and heat
control. This feature allows you to operate the unit in two different ways. 1.) as a full featured
fireplace insert with both flame effect and heater operating simultaneously and 2.) as a visual effect
with flame affect only. NOTE: This electric fireplace insert is not designed to operate in “heat” mode
without a flame effect.
ELECTRIC FIREPLACE CONTROLS
Remote Control
1. ON/OFF: The master power switch must be on. Press the ON/OFF button on the remote
control to turn on the flame effect.
2. ACCENT LIGHTING: This allows you to create a mood and highlight the simulated brick
refractory inside your electric fireplace. Settings range between low, medium, high, and off.
3. FLAME EFFECT: Press the flame “+” or flame “-“ button to select the desired flame effect.
4. HEATING: Press the heat button once for low heat, and twice for higher heat to achieve the
desired temperature. (NOTE: the flame effect is always active when the heating cycle is
operating. Press the button a third time to turn the heat off.
