PROGRAMMING
3-17
September 2001
Part No. 001-7240-001
Table 3-4 Group Programming Screen Description
This screen is used to add groups to a system or edit groups already assigned to a system. It is displayed by selecting the
Edit > Groups menu or clicking the
button in the toolbar (see Section 3.6.10). In the following screens, first select the
Group No. to be added or edited from the drop-down list or the list at the bottom. Then select the desired parameters and
make the changes by clicking the Change button (this is an Add button if adding a Group). To delete a group, select the Group
No. and then click the Delete button. When finished programming the system, click the Done button.
LTR and LTR-Net Group Programming Screen
Parameter
Description
Group No. This drop-down list selects the group to be added or edited in the screen.
Group Type This drop-down list selects one of the following call types:
LTR-Net Systems - Dispatch (standard group call), Telco (telephone call), Auxiliary (unique ID or directed
group call). Data calls are not currently available. See Sections 2.8.1 and 2.9.2.
LTR Systems - Dispatch (standard group call), RIC (telephone call). See Sections 2.8.1 and 2.10.2.
Alpha Tag This specifies the eight-character alpha tag that is displayed when the group is selected.
Priority
Selects the receive priority of the group. Priority numbers of 1-8 are selectable with LTR-Net and LTR groups
(Section 2.8.2).
Encode ID With dispatch (group) calls, selects the ID code that is transmitted. Codes 1-239 can be programmed with LTR-
Net systems, and 1-250 can be programmed with LTR systems (Section 2.8.1). When “Disabled” is selected,
transmitting is disabled, so the group is receive only.
Decode ID Similar to Encode ID except selects the receive code that must be decoded to receive a call on the group.
RIC ID
With LTR RIC group types only, selects the ID code on which a telephone call is received (Section 2.10.2).
Spare
Groups
With LTR-Net systems only, selects the number of additional groups that can be added to the system by over-
the-air programming. This reserves space in memory so additional groups can be added. Space for 0-8 groups
can be reserved. Currently, over-the-air programming is not available, so this value should always be “0”.
Add to Grp
Scan List
Selects the default scan list status of the group. This programming can be overridden by the scan list A/D key if
available (Section 2.6.7).
Encryption
Available
Encryption is currently not available.
Activate Call
Light
Selects if the call indicator is activated when a call is received on the group (Section 2.4.2).
Interruptible Selects if calls on the group can be interrupted by higher priority calls (Section 2.8.2).
Delayed
Proceed Tone
Selects if the proceed tone is delayed by the time programmed on the Timing Parameters screen when a call is
placed on the group (Section 2.4.9).
RIC ID
(if LTR and
RIC group
type
selected)
