SMARTNET/SMARTZONE FEATURES
40
Placing a Telephone Call
Telephone calls are placed by selecting the telephone number from a
preprogrammed list or directly entering it using the keypad of an optional
DTMF microphone. Proceed as follows.
Selecting Number From a List
1. With a SMARTNET/SmartZone channel selected, momentarily press
the
PHONE
option switch. The phone mode is indicated by the
icon, and the display indicates the alias of the last called telephone
number if it is in your phone number list. Otherwise, the last called tele-
phone number is displayed.
2. Scroll through the list of telephone numbers by rotating the Select
switch until the desired number is found. Press the
PHONE
option
switch again to cancel the call.
3. Press the PTT switch to initiate the call. The display indicates
“DIALING” while the connection to the phone system is occurring.
Once connected, the normal dial tone is heard and the alias of the
number being called is displayed. The radio then automatically dials the
telephone number and the normal ringing or busy tone is heard.
Proceed to the bulleted list following the next method for conditions
that may occur next.
Direct Entry (With Microphone Keypad Only)
1. With a SMARTNET/SmartZone channel selected, press and hold the
PHONE
option switch until a tone sounds (approximately 1 second).
The last phone number called is displayed, and the phone mode is indi-
cated by the
icon.
2. Enter the number using the 0-9,
#
, and
keys. To enter a pause (indi-
cated by “P”), press
and then
#
. The number scrolls to the left in
the display so that the seven right-most digits are always displayed.
Numbers up to 16 digits (including pauses) can be entered. To erase the
last digit entered, rotate the Select switch counterclockwise, and press
the
PHONE
switch to cancel the call.
*
*
