GENERAL OPERATION
21
switch as described on page 29. Selecting another conventional channel
does not change the current scan list. The scan lists are user program-
mable if the Scan Edit option switch is programmed (see page 22).
With SMARTNET/SmartZone operation, each channel can be
programmed so that one of up to three different scan lists is automatically
selected or scanning is disabled. The scan lists are user programmable if
the Scan Edit option switch is programmed (see page 22).
Radio Wide Mode Scan List
With radio wide scanning, there is only one preprogrammed scan list
available regardless of the type of channel selected, and it is not user
programmable.
Determining Which Channels are in Scan List
Channels in the conventional standard scan lists are indicated as
follows. Channels in the SMARTNET/SmartZone standard scan lists are
indicated only when editing a scan list as described on page 22. Channels
in the radio wide scan list are not indicated.
1. Enable standard scanning and also select the scan list if applicable (see
page 29).
2. Select the desired zone and then scroll through the channels by rotating
the Select switch. When the displayed channel is in the scan list
(scanned normally), the box
icon (around “
S
”) is indicated in the
upper left corner of the display
Nuisance Channel Delete
With standard scanning, conventional and SMARTNET/SmartZone
channels can be temporarily deleted from the scan list, for example, if
messages on a channel become annoying. This feature is not available
with radio wide scanning. Proceed as follows:
