E.F. Johnson Company 242-20X1-213, Manual

Page: 46 / 198

PULL DOWN MENUS
4-8
August 2000
Part No. 001-2001-200
Figure 4-22 RF LINE MONITOR
4.5.4 REVISION/VERSION
The Revision/Version is displayed for the
repeater modules in this screen. The format is R.V
(revision.version) for all modules. The MPC informa-
tion also includes the release date of the software and
the serial number of the repeater. The HSDB version
in Figure 4-23
is for J4, pins 5/6 connected in the MPC
and Figure 4-24 is the version for J4, pins 3/4 connected in
the MPC.
4.5.5 MODE SELECT
The Mode Select screen places the repeater either
in the Normal mode or the Test mode. In the Normal
mode the repeater operates as a normal repeater.
In the Test mode the repeater transmits a test
word. This test word is the Test Mode ID setup in the
Setup Parameters (see Section 4.3.1
).
C A U T I O N
While in the test mode the repeater is "busy", therefore
it is important to place the repeater in Normal mode
when the test mode is no longer required.
Figure 4-23 REVISION/VERSION
Figure 4-24 REVISION/VERSION
RF Line Monitor
Synthesizer Lock Lines
Exciter Synthesizer: Yes
Receive Synthesizer: Yes
Transmit Parameters
Forward Power: 0 Watts
Reflected Power: 0 Watts
Final Output 1/2: 0/ 0 ratio
Final Output 3/4: 0/ 0 ratio
Receive Parameters
RSSI: 0
System Parameters
Fan 1 Current: 0
Fan 2 Current: 0
Fan On: Off
Chassis Temp: 0 C
Battery Voltage: 0 Volts
Wideband Audio Output: 0
LO Injection: 0
Power Supply Temp: 0 C
(Not Calibrated)
Exciter High Stability: No
Receive High Stability: No
Repeater Version Display
Serial Number: 1234567891234567
HSDB: 2.1d MAC: 1.09 TIC: 0.00
Repeater Number: 1
MPC or TPI: 10.12 05/23/95 11
Repeater Version Display
Serial Number: 1234567891234567
Repeater Number: 1
MPC or TPI: 10.12 05/23/95 11
HSDB: 50.02 MAC: 1.09 TIC: 0.00