16
Configurations Software
3.
Menu Items
3.1 File
Opens the saved sensor configuration settings from an archive file on the PC.
Saves the displayed configuration settings in an archive file on the PC.
Selects the USB interface used on your PC.
If the "Remember next time" box is checked, the selected interface will always be used in
future.The number of the USB Port can be found under:
Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
Closes the configuration software.
3.2 Help
Provides general information on the configuration software.
4.
EE75 Configurator
4.1 Start
The "Start" tab is used to initiate communication
with the connected sensor.
This function downloads the current sensor configuration and serial number.
The configuration changes made on the other tabs can be uploaded to the
sensor using the "Write" command.
Note: Execute the "Read" function before making any new configuration change!
Load Settings:
Save Settings:
Select COM Port:
Exit:
Read:
Write:
Summary of Contents for EE75
Page 23: ...22 Configurations Software...
