User Manual EE360
Moisture in Oil Sensor | 10
4 Mounting and Installation
4.1 Mechanical Installation
4.1.1. Mounting of the Enclosure
▪
Drill the mounting holes according to the corresponding mounting pattern below.
▪
Mount the back section of the enclosure with 4 screws (screw diameter <4.2 mm (0.2"), not included in the
scope of supply). Values in mm (inch).
54 (2.13)
14 (0.55)
166 (6.54)
5.1 (0.20)
7 (0.28)
Fig. 3
Drilling pattern of polycarbonate enclosure
5.1 (0.20)
7 (0.28)
75 (2.95)
200 (7.87)
Fig. 4
Drilling pattern of stainless steel enclosure
4.1.2. DIN Rail Mounting of the Polycarbonate Enclosure
▪
Mount the two DIN rail brackets onto the back section.
(to be ordered separately, see chapter 8 Spare Parts and Accessories)
▪
Snap in the enclosure onto the DIN rail.
Fig. 5
DIN rail installation