E-castle EOS960H, User Manual

Page: 29 / 47

‐ 29 ‐
4.2.4.1. MOTION
CAMERA Select camera for motion setup
SENSITIVITY
Adjust motion sensitivity from 0~9
The higher number, the more sensitive detection
ALARM ‐ OUT Select alarm ‐ out number which will be triggered when
motion is detected.
RECORDCH
Select channels which will record when motion is detected.
BUZZER Set ON/OFF for buzzer when motion is detected
NIGHT
MODE
Set separate sensitivity for day and for night. This option can
be used in order to avoid false motion event caused by
camera noise at night.
SET ALL All area (8x8 Grid) will be enabled for motion detection.
CLEAR ALL All area (8x8 Grid) will be disabled for motion detection.
4.2.4.2. SENSOR
TYPE Select NO(Normal open)/NC(Normal closed)
RECORD
Select camera channels which will record when sensor is
activated.
ALARM ‐ OUT Select alarm ‐ out number which will be triggered when
sensor is activated.
BUZZER Set ON/OFF for buzzer when sensor is activated.
4.2.4.3. VLOSS
ALARM ‐
OUT
Select alarm ‐ out numbers that will be triggered when
video loss occurs.
BUZZER
Set ON/OFF for buzzer when video loss occurs.
ALL Apply the same settings to all channels.
4.2.4.4. E ‐ MAIL
DVR can send e ‐ mail notification when events occur.