35
c)
The service mode is activated by turning the CH potentiometer fully clockwise. This function is
only for qualified person (not for users).
: Service mode can be used only by qualified person.
DHW Temperature Control Potentiometer
The DHW potentiometer has 2 functions (fig. 26):
a)
to set the DHW water temperature between 35
0
C (min.) and 60
0
C (max.).
fig. 26
b)
to activate DHW priority cancellation function.
- This mode can be activated by turning the DHW potentiometer fully counter-clockwise.
Pressure Push-button
The pressure push-button is used to display CH water pressure.
- Push the pressure push-button to see CH water pressure (bar) on the LCD display. The value
remains active for 10 seconds on the LCD display (Table 3 – Pressure mode).
Reset Push-button / Burner LED
- Reset push-button is used to reset main board if the errors cause a lock-out condition.
- Burner LED shows flame and failure indication (
RED
/
BLUE
).
Transparent Control Panel Cover
4
5
6
7
Summary of Contents for Confeo Premix CP 24 HST
