33
Control Panel
The control panel shown in fig. 24 consists of the following parts as detailed below.
fig. 24
ON/OFF Switch
The appliance is turned ON/OFF using the ON/OFF switch.
Display Panel: Blue Backlight LCD Display and 3 Yellow Status LEDs
a) Blue Backlight LCD Display (2-Digit)
Operation modes, actual and setpoint CH temperature, setpoint DHW temperature, error codes and
CH water pressure value can be seen on LCD display (Table 3).
b) 3 Yellow Status LEDs
•
Status LED Central Heating (CH)
•
Status LED Domestic Hot Water (DHW)
•
Status LED Service Mode
•
Status LED Comfort has no function because Comfort mode is not available in the HST models.
CH Temperature Control Potentiometer
The CH potentiometer has 3 functions (fig.25):
a)
to set the CH water temperature between 30
0
C and 80
0
C.
:Setpoint CH water temperature can also be adjusted via external main
board communication, room thermostat. The CH potentiometer has no
effect anymore on the system if the system has the room thermostat and
also it is active. Additionally, CH potentiometer should be the maximum
position.
b)
to select summer / winter mode.
- The winter mode is in the range of 30 °C (min.) to 80 °C (max.).
- The summer mode can be activated by turning the CH potentiometer fully counter-clockwise.
1
2
3
Summary of Contents for Confeo Premix CP 24 HST
