5. Hold the adjuster with the Allen wrench,
and tighten the locknut (B, Figure 16) securely.
6. Set the pads by sharply apply the brakes
four or five times.
NOTE:
A slight amount of pad scraping is normal,
especially with new brakes or new brake pads.
7. Spin the wheel and check for brake
pad/disc scraping. Repeat the adjustment pro-
cedure if scraping is noted.
Brake Pad Clearance Adjustment (LE
Models)
An optional Diatech Twin Cam Disc Brake is
aavailable for LE models. The following proce-
dure describes brake pad adjustment on this
disc brake.
1. Hold the adjuster (A, Figure 17) with an
Allen wrench, and loosen the adjuster locknut
(B, Figure 17).
2. Spin the wheel and turn the adjuster clock-
wise until the brake pads barely scrape against
the brake disc.
3. Back out the adjuster 1/2 turn (counter-
clockwise).
4. Hold the adjuster with an Allen wrench, and
tighten the locknut (B, Figure 17) securely.
5. Set the pads by sharply apply the brakes
four or five times.
NOTE
A slight amount of pad scraping is normal,
especially with new brakes or new brake pads.
6. Spin the wheel and check for brake
pad/disc scraping. Repeat the adjustment pro-
cedure if scraping is noted.
FIG. 17
A
A
B
B
Chapter Five
5-8