7.2 Control Panel - icons
Meaning of the LED's and the buttons
8 LED's and 3 buttons are available for programming:
"P", the respective programming operation is selected or completed.
"+" "-" Multi function buttons - move the drive during programming through additional menus.
7.3 Adjusting the end position for "Open”
Step 1:
If the drive is connected to the mains supply, LED3 lights up.
Step 2:
Press the button "P" and then release, LED2 flashes
Step 3:
Press and hold the "+" button while the door is opening. When the garage door is fully
open, release the button "+". If the door is opened too far, briefly press the "-" button to move
the door downwards slightly. With the buttons "-" "+" you can correct the situation further.
LED lights up LED flashes
LED is off
Do not push
Press and
release
Press and
hold
25
