10. Deleting radio codes of the transmitter to the receiver (drive)
Warning:
Performing this function deletes all radio information of the receiver. This means
that the drive can no longer be used with any of the radio transmitters that were programmed
for the receiver. These radio transmitters need to be reprogrammed as per 8.1 to the receiver.
Step 1:
Press and hold button "P" until all LEDs light up and LED 7 flashes.
Step 2:
Press the button "-", until LED 7 goes out and flashes again, indicating the successful
deletion of the remote control.
Step 3:
Press the P button to save.
Check the deletion with a transmitter that has been used up until then. If the drive can no
longer be operated with this transmitter, this indicates that the deletion was successful.
34
