Mount the door bearings here centrally to the head wall bracket and the top edge of the door.
6.6Connecting the pull / push rod with the door bearing and carriage
May vary depending on the type of door. Follow the applicable instructions.
A Sectional doors
Step 1:
Close the door. Disconnect the transport carriage by triggering the emergency
release.
Step 2:
Attach the curved pull / push rod to the door bearings and the transport carriage with
the locking bolt and secure it with the safety clip.
B Swing doors
Head wall
Head bearing
(
Finished ceiling)
Vertical
centre of the
garage door
Door bearing
19