service manual
Issued 05/05
8
Fitting notes
Removing and dismantling the yoke assembly
Release the yoke loom from the back of the
yoke assembly.
Remove both gimble clips from either side
of the cleanerhead top hinge.
Prise the large and small gimble clips out of
either side of the cleanerhead top hinge using a
thin flat bladed screwdriver.
Push the end of the gimble lock arm
assembly out of the same side of the yoke.
Prise the rear of the hose guard out of the
yoke using a thin flat bladed screwdriver.
Remove the yoke assembly from the rear
of the cleanerhead top hinge.
9
10
11
14
13
12