service manual
Issued 05/05
33
Fitting notes
Removing and dismantling the valve assembly
Undo the screw with the washer and
remove the static cover.
Remove the screw and washer in the
spring mount assembly.
Carefully unhook the front spring from the
peg on the valve assembly.
Lift the spring mount assembly off the side
of the valve assembly.
Remove the rear of the moving cover and
the rear spring off the retaining peg.
Pull the front face of the moving cover off the
retaining peg on the rear of the valve assembly.
Before continuing, the following parts
need to be removed as previously shown:
cleanerhead and yoke, (pages 6-7)
ball and motor bucket, (pages 20-21)
146
149
147
150
151
148
