DWSC-400
8
4. Replace the cover onto the battery holder and mount the appliance back on the console.
Never dispose of the replaced batteries in the household waste, because they will
endanger the environment! Please use a dedicated waste container provided for this
purpose or a collecting station for disposing of used batteries!
Never throw the batteries in the fire, because they can explode.
Installation of the device supporting console.
We recommmend employing a professional to install the appliance console, as the installation requires drilling.
1. Mark the holes for the metal support console on the surface where the balance is to be installed. Take the
safety instructions into account when positioning the console.
2. Use the markings to drill the 3 holes for inserting the dowels. When selecting the hole diameter please also
consider the wall material. The dowels must be fully sunk into the holes.
3. Use the screws provided to mount the metal console onto the wall.
4. Mount the device on the metal supporting console. For this purpose line up the clinging shoulders of the
metal console with the gaps at the back of the device, then slide the appliance down onto the console.
5. You can remove the device from the supporting console by lifting it off.
USINg of aPPLIaNCE
Before use
1. Unpack the appliance and remove all the packing materials.
2. Examine the device to make sure it’s complete and has not suffered any damage. You should only use the
device if all parts are present and undamaged.
3. When unpacking the product, the glass weighing plate will not be on the device. This needs to be set up
before the first use – the device is unable to weigh otherwise. To assemble, insert the threaded spindle on
the bottom of the plate into the threaded socket on the device, then turn it carefully clockwise until it is
fully tightened. When tightening the plate thread, take care to apply the minimum force required and avoid
overtighting but do not leave it loose. Overtightening can damage or break the thread. Cross-threading can
cause damage to both threaded spindle and socket; take particular care to avoid this happening.
4. In case of new device insert new batteries in it as described in the section “Battery replacement”.
5. Install the supporting console as described above, and mount the balance on it.