![background image](http://html1.mh-extra.com/html/dynojet/dynoware-rt/dynoware-rt_installation-manual_2550824062.webp)
C H A P T E R 3
Replace Covers
DynoWare RT Upgrade for Model 424x Dynamometers Installation Guide
3-28
REPLACE COVERS
Use the following instructions to replace the covers on your above or in ground dyno.
R
EPLACING
THE
C
OVERS
—A
BOVE
G
ROUND
D
YNOS
Replace the logo panel and eddy current brake top covers on both the stationary and
4WD dynos.
1
Secure the small top cover using the four screws removed earlier.
2
Secure the large top cover using the eight screws removed earlier.
3
Secure the logo panel using the six screws removed earlier.
Figure 3-23: Install the Logo Panel and ECB Top Covers
AD634
logo panel
small top cover
large top cover