P/N: 975389
|
Rev: current
|
ECO: xxxxx
www.dynisco.com
From lab to production,
providing a window into the process
-17-
4.1.4
Assemble and attach RSU support to mast
•
Loosen the four connector set screws at each end of item 12 (QTY 1)
•
Slide two t-nuts on one end of item 12 into end of item 11 (QTY 1) without
connectors
•
Tighten two connector set screws of item 12
•
Slide the RSU support onto item 3
•
Tighten the two connector set screws of item 11 for the desired height of the
ViscoIndicator RSU
•
Loosen the connection between items 11 and 12, and move item 12 to make both
ends of item 12 flush to items 11 and 3
•
Tighten all four connector set screws of item 12
•
CAUTION: The higher the RSU support on the mast the greater the instability.
Position the RSU support as low as possible (installation specific).
