Dynex DX-E401 - EN Broadband Router User Manual Download

Page: 37 / 72

Using the Configuration Menu (continued)

Tools > System

The current system settings can be saved as a file onto the local hard drive. The saved

file or any other saved setting file can be loaded back on the Cable/DSL Router. To reload

a system settings file, click on

Browse

to browse the local hard drive and locate the

system file to be used. You may also reset the Cable/DSL back to factory settings by

clicking on

Restore.

Click

Save

to save the current settings to the local Hard Drive.

Click

Browse

to find the settings, then click

Load

Save Settings to

Local Hard Drive

Load Settings from

Local Hard Drive

Restore to Factory

Default Settings

Click

Restore

to restore the factory default settings.

Summary of Contents for DX-E401 - EN Broadband Router









































































Search results

Summary of Contents for DX-E401 - EN Broadband Router

Reviews:

Related manuals for DX-E401 - EN Broadband Router

Brands by name

Popular brands

Dynex DX-E401 - EN Broadband Router, User Manual

Search results

Summary of Contents for DX-E401 - EN Broadband Router

Reviews:

Related manuals for DX-E401 - EN Broadband Router

Brands by name

Popular brands