manualshive.com logo in svg

Dynex DX-E401 - EN Broadband Router, User Manual

Share
Download
Dynex DX-E401 - EN Broadband Router User Manual Download Page 39

39

Using the Configuration Menu (continued)

Tools > Misc

Ping Test

Restart

Device

Block

WAN

Ping

Discard Ping from

WAN side-

The Ping Test is used to

send Ping packets to test if

a computer is on the

Internet. Enter the IP Ad-

dress that you wish to Ping,

and click 

Ping

If you choose to block WAN

Ping, the WAN IP Address

of the DX-E401. will not re-

spond to pings. Blocking the

Ping may provide some ex-

tra security from hackers.

Click 

Reboot

 to restart the

DX-E401.

Click 

Enabled

 to block the

WAN ping

UPNP

Gaming

Mode

Dynamic

DNS

To use the 

Universal Plug and Play

 feature click on 

Enabled

. UPNP

provides compatibility with networking equipment, software and periph-

erals of the over 400 vendors that cooperate in the Plug and Play forum.

Gaming mode allows a form of pass-through for certain Internet Games.

If you are using Xbox, Playstation2 or a PC, make sure you are using

the latest firmware and Gaming Mode is enabled. To utilize Gaming

Mode, click 

Enabled. 

If you are not using a Gaming application, it is

recommended that you 

Disable

 Gaming Mode.

Dynamic Domain Name System is a method of keeping a domain name

linked to a changing IP Address. This is a useful feature since many

computers do not use a static IP address.

VPN

Pass

Through

PPTP-

 

select 

Enabled

 or 

Disabled

IPSec-

 

select 

Enabled

 or 

Disabled

The DX-E401 supports VPN (Virtual Private Network) pass-through for

both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security).

Once VPN pass-through is enabled, there is no need to open up virtual

services. Multiple VPN connections can be made through the DX-E401.

This is useful when you have many VPN clients on the LAN network.

Summary of Contents for DX-E401 - EN Broadband Router









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands