Tower ESS Unit User Manual
21
3.6.4.3 P
ress
the “POWER WAKE” button for about 3S. The system start-up.
3.6.4.4 Use a multimeter to measure the output voltage on the positive and negative ports of the
BDU
3.7.4.5 The output voltage should conform to the voltage range in the table
“
Table 2-1 The
parameter of Tower system
”
. Otherwise, the system will be not working properly.
●
Use a multimeter to check the output voltage is within the normal range
Danger:
The voltage of the battery is too high, please pay attention to do self-protection during
the measurement.
3.6.5 Shut down the system.
●
Switch off the “POWER ON” switch.
●
Switch the BDU
“
DC BREAKER
”
to the "OFF" state .
Press and hold on 3s
