Tower ESS Unit User Manual
16
NOTE:
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces with available
insulated alternatives, except their tip, with electrical tape.
3.4 Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack
3.5 Unpacking inspection
l
When the equipment arrives at the installation site, loading and unloading should
be performed according to the rules and regulations, to prevent from being
exposed under sunlight. Battery should not be installed in direct sunlight.
Please
refer to Section 3.3
l
Before unpacking, the total number of packages shall be indicated according to the
shipping list attached to each package, and the case shall be checked for good
condition.
l
In the process of unpacking, handle with care and protect the surface coating of the
object.
l
Open the package, the installation personnel should read the technical documents,
verify the list, according to the configuration table and packing list, ensure objects
are complete and intact, if the internal packing is damaged, should be examined
and recorded in detail.
Packing list is as follows:
Item
Specification
Quantity
Figure
