INSTRUCTION MANUAL
13
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart (approx. 1litre) of warm water.
• Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before placing back into the
wine cooler.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
• Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with a clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with
steel particles and rust may occur.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times that the door is open. If the power is going to be off for a longer period,
you may like to take the proper steps to protect the contents.
MOVING THE WINE COOLER
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Shorten the adjustable legs into the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transport. Also protect outside of
appliance with a blanket, or similar item.
ENERGY SAVING TIPS
• The appliance should be located away from heat producing appliances, and away from direct sunlight.
• Ensure that the unit is adequately ventilated. Never cover air vents.
• Only open the door when necessary. Avoid leaving the door open for long periods or opening/closing the
door frequently.
