INSTRUCTION MANUAL
8
ACCESSORY INSTALLATION BEFORE OPERATION
UNPACKING AND CLEANING THE WINE COOLER
• Remove the exterior and interior packing materials.
• Let the appliance stand upright for approximately
24 hours
before connecting it to the power source, which
helps to reduce the possibility of a cooling-system malfunction from movement during transport.
• Use a soft cloth to clean the interior surface with lukewarm water.
• Install the door handle provided with the appliance by following these steps:
-Remove the rubber gasket on the door
to expose the two screw holes.
-Install the handle with the
screws and washers provided.
-Replace the gasket by pressing into place.
LOCK & UNLOCK THE DOOR (OPTIONAL)
•
A Lock is optional . If your Wine Cooler has a lock, a key should be attached inside the packing of this
Manual.
•
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock it, please follow the
revers operation. Please save the key.
