Dynaudio custom install limited warranty
Dynaudio warrants its custom install products to be free from defects in
materials and workmanship under conditions of normal use and service
for a lifetime period from the date of original purchase. For this warranty
to apply, the unit must be installed and used according to its written
instructions.
The obligation under this warranty shall be limited to the replacement,
repair or refund of any such defective device within the warranty period,
provided that:
1. inspection by Dynaudio indicates the validity of the claim;
2. the defect is not the result of damage, misuse, lightning, power
surges, negligence, improper operation (installation) or failure to follow
instructions contained in the manual or written instructions provided by
Dynaudio after the original purchase;
3. the product has not been altered in any way or repaired by others and
that factory sealed units are unopened (a service charge plus parts and
labour will be applied to units defaced or physically damaged);
4. the dealer from whom the Dynaudio products were purchased was
authorized to sell such products at the time of the original purchase;
5. the service provider for, including but not limited, installation or repair
of the product, was authorized in writing by Dynaudio;
6. the original, dated Bill of Sale is presented whenever service is required
during the warranty period;
7. freight charges for the return of products to Dynaudio are prepaid;
8. all units ‘out of warranty’ are subject to a service charge. The service
charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labour).
This warranty is in lieu of and excludes all other warranties, expressed or
implied. Neither this warranty nor any other warranty, express or implied,
including implied warranties of merchantability and fitness, shall extend
beyond the warranty period.
Dynaudio shall not be liable for damages to any other equipment or
other items at the site of use, or any other damages whether incidental,
consequential or otherwise. Dynaudio shall not be liable for any anticipated
profits, any incidental or consequential damages, loss of time or other
losses incurred by the purchaser in connection with the purchase,
operation or use of the product.
The information this document contains is subject to change without
notice. In the event that there are differences between this warranty and
the provisions of any advertisements, documentation, product brochures or
packaging cartons, the terms of this warranty shall prevail.
Welcome to the custom install Studio Series
and thank you for choosing a Dynaudio Custom
Install product.
The Studio Series comprises the S4-C65, S4-DVC65
and S4-C80 in-ceiling speakers and the S4-W65 and
S4-W80 in-wall speakers.
Each is designed to offer high quality audio
performance while at the same time incorporating
features and facilities designed to ease installation.
1. Introduction
This manual describes the installation of Studio Series speakers
within drywall/plasterboard walls and ceilings. It begins by listing
the contents of the Studio Series cartons and continues with
sections that provide information common to in-ceiling and in-wall
speakers. Later sections in the manual provide information specific
to installing in-ceiling or in-wall speakers.
If this is your first time working with Dynaudio Studio Series
custom install speakers, or if you have not done so for a while, we
recommend that you read the appropriate sections of this manual
before you begin.
Note:
Visit dynaudio.com for the latest Studio Series news and
information.
The Studio Series is designed to provide very high quality audio in
custom installations where speakers are required to be fitted flush
in walls and ceilings. The Studio Series not only benefits from four
decades of Dynaudio speaker expertise but has been designed
from first principles to offer a new approach to custom speaker
installation and performance.
2018 Dynaudio CI manual - Item No. 307001016932 Rev N - EN.indd 2
05/01/2018 12.39
